OCamllabs icon Home|Differences with the last checks|Previous runs


Building on x86-bm-c7.sw.ocaml.org

(from ocaml/opam:debian-unstable)
Unable to find image 'ocaml/opam:debian-unstable' locally
debian-unstable: Pulling from ocaml/opam
3b0eba3199c9: Pulling fs layer
3b0eba3199c9: Verifying Checksum
3b0eba3199c9: Download complete
3b0eba3199c9: Pull complete
Digest: sha256:728f5640961821acc3c3615502bcc556ec255cb25e8860aae98b3690dfbd682e
Status: Downloaded newer image for ocaml/opam:debian-unstable
2024-11-22 01:15.38 ---> using "0acd5aeaa8f7bc314514d9795d14a7f12ec72a6a5b11c5904350189734c6859b" from cache

/: (user (uid 1000) (gid 1000))

/: (env OPAMPRECISETRACKING 1)

/: (env OPAMUTF8 never)

/: (env OPAMEXTERNALSOLVER builtin-0install)

/: (env OPAMCRITERIA +removed)

/: (env CI true)

/: (env OPAM_HEALTH_CHECK_CI true)

/: (run (shell "sudo ln -f /usr/bin/opam-dev /usr/bin/opam"))
2024-11-22 01:15.38 ---> using "40df4fa4cdfc68a5fa7a326047e82a7adc5df52b8059d4a7b745bdd50aad56e7" from cache

/: (run (network host)
        (shell "rm -rf ~/opam-repository && git clone -q 'https://github.com/ocaml/opam-repository' ~/opam-repository && git -C ~/opam-repository checkout -q 232a37e8b008dc04381f5e98c16badfc02ea6962"))
2024-11-22 01:15.38 ---> using "3627aca0cf09d425091b1834dc367b2d674ea958c1073cfd571626e801400fa8" from cache

/: (run (shell "rm -rf ~/.opam && opam init -ya --bare --config ~/.opamrc-sandbox ~/opam-repository"))
Configuring from /home/opam/.opamrc-sandbox, then /home/opam/.opamrc, and finally from built-in defaults.
Checking for available remotes: rsync and local, git.
  - you won't be able to use mercurial repositories unless you install the hg command on your system.
  - you won't be able to use darcs repositories unless you install the darcs command on your system.


<><> Fetching repository information ><><><><><><><><><><><><><><><><><><><><><>
[default] Initialised

User configuration:
  ~/.profile is already up-to-date.
[NOTE] Make sure that ~/.profile is well sourced in your ~/.bashrc.

2024-11-22 01:15.38 ---> using "12ca91eed672409146ffeb97abf8b2057aa9490eea5153239f28fb1d87ff4305" from cache

/: (run (cache (opam-archives (target /home/opam/.opam/download-cache)))
        (network host)
        (shell "opam switch create --repositories=default '4.12' '4.12.1'"))

<><> Installing new switch packages <><><><><><><><><><><><><><><><><><><><><><>
Switch invariant: ["ocaml-base-compiler" {= "4.12.1"} | "ocaml-system" {= "4.12.1"}]

<><> Processing actions <><><><><><><><><><><><><><><><><><><><><><><><><><><><>
-> installed base-bigarray.base
-> installed base-threads.base
-> installed base-unix.base
-> installed ocaml-options-vanilla.1
-> retrieved ocaml-config.2  (2 extra sources)
-> retrieved ocaml-config.2  (2 extra sources)
-> retrieved ocaml-base-compiler.4.12.1  (https://github.com/ocaml/ocaml/archive/4.12.1.tar.gz)
-> installed ocaml-base-compiler.4.12.1
-> installed ocaml-config.2
-> installed ocaml.4.12.1
Done.
# To update the current shell environment, run: eval $(opam env --switch=4.12)
2024-11-22 01:15.38 ---> using "f768c521c3b932d02233428dd3e9c76210a1b42cd8c1b060678dd47e223151c5" from cache

/: (run (network host)
        (shell "opam update --depexts"))
+ /usr/bin/sudo "apt-get" "update"
- Get:1 http://deb.debian.org/debian unstable InRelease [202 kB]
- Get:2 http://deb.debian.org/debian unstable/main amd64 Packages.diff/Index [63.6 kB]
- Get:3 http://deb.debian.org/debian unstable/main amd64 Packages T-2024-11-21-2009.31-F-2024-11-19-1405.22.pdiff [124 kB]
- Get:3 http://deb.debian.org/debian unstable/main amd64 Packages T-2024-11-21-2009.31-F-2024-11-19-1405.22.pdiff [124 kB]
- Fetched 390 kB in 3s (140 kB/s)
- Reading package lists...
- 
2024-11-22 01:15.38 ---> using "d2a9f785b0a59ad16c1773c08ce3dea2358650c41feab87c8be02a6637a526f7" from cache

/: (run (cache (opam-archives (target /home/opam/.opam/download-cache)))
        (network host)
        (shell  "\
               \nopam remove -y \"aacplus.0.2.2\"\
               \nopam install -vy \"aacplus.0.2.2\"\
               \nres=$?\
               \nif [ $res = 31 ]; then\
               \n    if opam show -f x-ci-accept-failures: \"aacplus.0.2.2\" | grep -q '\"debian-unstable\"'; then\
               \n        echo \"This package failed and has been disabled for CI using the 'x-ci-accept-failures' field.\"\
               \n        exit 69\
               \n    fi\
               \nfi\
               \n\
               \n\
               \nexit $res\
               \n"))
[NOTE] aacplus.0.2.2 is not installed.

Nothing to do.
The following actions will be performed:
=== install 3 packages
  - install aacplus         0.2.2
  - install conf-pkg-config 3     [required by aacplus]
  - install ocamlfind       1.9.6 [required by aacplus]

The following system packages will first need to be installed:
    pkg-config

<><> Handling external dependencies <><><><><><><><><><><><><><><><><><><><><><>

opam believes some required external dependencies are missing. opam can:
> 1. Run apt-get to install them (may need root/sudo access)
  2. Display the recommended apt-get command and wait while you run it manually (e.g. in another terminal)
  3. Continue anyway, and, upon success, permanently register that this external dependency is present, but not detectable
  4. Abort the installation

[1/2/3/4] 1

+ /usr/bin/sudo "apt-get" "install" "-qq" "-yy" "pkg-config"
- debconf: delaying package configuration, since apt-utils is not installed
- Selecting previously unselected package libpkgconf3:amd64.
- (Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 19808 files and directories currently installed.)
- Preparing to unpack .../libpkgconf3_1.8.1-4_amd64.deb ...
- Unpacking libpkgconf3:amd64 (1.8.1-4) ...
- Selecting previously unselected package pkgconf-bin.
- Preparing to unpack .../pkgconf-bin_1.8.1-4_amd64.deb ...
- Unpacking pkgconf-bin (1.8.1-4) ...
- Selecting previously unselected package pkgconf:amd64.
- Preparing to unpack .../pkgconf_1.8.1-4_amd64.deb ...
- Unpacking pkgconf:amd64 (1.8.1-4) ...
- Selecting previously unselected package pkg-config:amd64.
- Preparing to unpack .../pkg-config_1.8.1-4_amd64.deb ...
- Unpacking pkg-config:amd64 (1.8.1-4) ...
- Setting up libpkgconf3:amd64 (1.8.1-4) ...
- Setting up pkgconf-bin (1.8.1-4) ...
- Setting up pkgconf:amd64 (1.8.1-4) ...
- Setting up pkg-config:amd64 (1.8.1-4) ...
- Processing triggers for libc-bin (2.40-3) ...

<><> Processing actions <><><><><><><><><><><><><><><><><><><><><><><><><><><><>
Processing  1/9: [aacplus.0.2.2: http]
Processing  2/9: [aacplus.0.2.2: http]
Processing  3/9: [aacplus.0.2.2: http] [ocamlfind.1.9.6: extract]
Processing  4/9: [aacplus.0.2.2: http] [ocamlfind.1.9.6: extract] [conf-pkg-config: pkg-config]
-> retrieved ocamlfind.1.9.6  (cached)
Processing  4/9: [aacplus.0.2.2: http] [conf-pkg-config: pkg-config]
[ocamlfind: patch] applying 0001-Harden-test-for-OCaml-5.patch
Processing  5/9: [aacplus.0.2.2: http] [conf-pkg-config: pkg-config] [ocamlfind: patch]
+ /home/opam/.opam/opam-init/hooks/sandbox.sh "build" "pkg-config" "--help" (CWD=/home/opam/.opam/4.12/.opam-switch/build/conf-pkg-config.3)
- usage: pkgconf [OPTIONS] [LIBRARIES]
- 
- basic options:
- 
-   --help                            this message
-   --about                           print pkgconf version and license to stdout
-   --version                         print supported pkg-config version to stdout
-   --atleast-pkgconfig-version       check whether or not pkgconf is compatible
-                                     with a specified pkg-config version
-   --errors-to-stdout                print all errors on stdout instead of stderr
-   --print-errors                    ensure all errors are printed
-   --short-errors                    be less verbose about some errors
-   --silence-errors                  explicitly be silent about errors
-   --list-all                        list all known packages
-   --list-package-names              list all known package names
-   --simulate                        simulate walking the calculated dependency graph
-   --no-cache                        do not cache already seen packages when
-                                     walking the dependency graph
-   --log-file=filename               write an audit log to a specified file
-   --with-path=path                  adds a directory to the search path
-   --define-prefix                   override the prefix variable with one that is guessed based on
-                                     the location of the .pc file
-   --dont-define-prefix              do not override the prefix variable under any circumstances
-   --prefix-variable=varname         sets the name of the variable that pkgconf considers
-                                     to be the package prefix
-   --relocate=path                   relocates a path and exits (mostly for testsuite)
-   --dont-relocate-paths             disables path relocation support
- 
- cross-compilation personality support:
- 
-   --personality=triplet|filename    sets the personality to 'triplet' or a file named 'filename'
-   --dump-personality                dumps details concerning selected personality
- 
- checking specific pkg-config database entries:
- 
-   --atleast-version                 require a specific version of a module
-   --exact-version                   require an exact version of a module
-   --max-version                     require a maximum version of a module
-   --exists                          check whether or not a module exists
-   --uninstalled                     check whether or not an uninstalled module will be used
-   --no-uninstalled                  never use uninstalled modules when satisfying dependencies
-   --no-provides                     do not use 'provides' rules to resolve dependencies
-   --maximum-traverse-depth          maximum allowed depth for dependency graph
-   --static                          be more aggressive when computing dependency graph
-                                     (for static linking)
-   --shared                          use a simplified dependency graph (usually default)
-   --pure                            optimize a static dependency graph as if it were a normal
-                                     dependency graph
-   --env-only                        look only for package entries in PKG_CONFIG_PATH
-   --ignore-conflicts                ignore 'conflicts' rules in modules
-   --validate                        validate specific .pc files for correctness
- 
- querying specific pkg-config database fields:
- 
-   --define-variable=varname=value   define variable 'varname' as 'value'
-   --variable=varname                print specified variable entry to stdout
-   --cflags                          print required CFLAGS to stdout
-   --cflags-only-I                   print required include-dir CFLAGS to stdout
-   --cflags-only-other               print required non-include-dir CFLAGS to stdout
-   --libs                            print required linker flags to stdout
-   --libs-only-L                     print required LDPATH linker flags to stdout
-   --libs-only-l                     print required LIBNAME linker flags to stdout
-   --libs-only-other                 print required other linker flags to stdout
-   --print-requires                  print required dependency frameworks to stdout
-   --print-requires-private          print required dependency frameworks for static
-                                     linking to stdout
-   --print-provides                  print provided dependencies to stdout
-   --print-variables                 print all known variables in module to stdout
-   --digraph                         print entire dependency graph in graphviz 'dot' format
-   --keep-system-cflags              keep -I/usr/include entries in cflags output
-   --keep-system-libs                keep -L/lib:/lib/i386-linux-gnu:/lib/x86_64-linux-gnu:/lib/x86_64-linux-gnux32:/lib32:/libx32:/usr/lib:/usr/lib/i386-linux-gnu:/usr/lib/x86_64-linux-gnu:/usr/lib/x86_64-linux-gnux32:/usr/lib32:/usr/libx32 entries in libs output
-   --path                            show the exact filenames for any matching .pc files
-   --modversion                      print the specified module's version to stdout
-   --internal-cflags                 do not filter 'internal' cflags from output
- 
- filtering output:
- 
-   --msvc-syntax                     print translatable fragments in MSVC syntax
-   --fragment-filter=types           filter output fragments to the specified types
- 
- report bugs to <https://github.com/pkgconf/pkgconf/issues/new>.
-> compiled  conf-pkg-config.3
Processing  5/9: [aacplus.0.2.2: http] [ocamlfind: patch]
-> installed conf-pkg-config.3
Processing  6/9: [aacplus.0.2.2: http] [ocamlfind: patch]
Processing  6/9: [aacplus.0.2.2: http] [ocamlfind: ./configure]
Processing  6/9: [aacplus.0.2.2: extract] [ocamlfind: ./configure]
-> retrieved aacplus.0.2.2  (https://github.com/savonet/ocaml-aacplus/releases/download/0.2.2/ocaml-aacplus-0.2.2.tar.gz)
Processing  6/9: [ocamlfind: ./configure]
+ /home/opam/.opam/opam-init/hooks/sandbox.sh "build" "./configure" "-bindir" "/home/opam/.opam/4.12/bin" "-sitelib" "/home/opam/.opam/4.12/lib" "-mandir" "/home/opam/.opam/4.12/man" "-config" "/home/opam/.opam/4.12/lib/findlib.conf" "-no-custom" "-no-camlp4" (CWD=/home/opam/.opam/4.12/.opam-switch/build/ocamlfind.1.9.6)
- Welcome to findlib version 1.9.6
- Configuring core...
- Checking for #remove_directory...
- Testing threading model...
- systhread_supported: true
- Testing DLLs...
- Testing whether ppxopt can be supported...
- Checking for ocamlc -opaque...
- Checking for ocamlopt -g...
- Querying installation: META list not found
- make install will double-check installed META files
- Configuring libraries...
- unix: found
- dynlink: found
- bigarray: found
- compiler-libs: found
- dbm: not present (normal since 4.00)
- graphics: not present (normal since 4.09)
- num: not present (normal since 4.06)
- ocamlbuild: not present (normal since 4.03)
- ocamldoc: found (in +ocamldoc)
- raw_spacetime: not present (normal since 4.12)
- threads: found (in +threads)
- str: found
- labltk: not present (normal since 4.02)
- native dynlink: found
- camlp4: disabled
- bytes: found, installing fake library
- Configuration for stdlib written to site-lib-src/stdlib/META
- Configuration for unix written to site-lib-src/unix/META
- Configuration for dynlink written to site-lib-src/dynlink/META
- Configuration for bigarray written to site-lib-src/bigarray/META
- Configuration for compiler-libs written to site-lib-src/compiler-libs/META
- Configuration for ocamldoc written to site-lib-src/ocamldoc/META
- Configuration for threads written to site-lib-src/threads/META
- Configuration for str written to site-lib-src/str/META
- Configuration for bytes written to site-lib-src/bytes/META
- Detecting compiler arguments: (extractor built) ok
- 
- About the OCAML core installation:
-     Standard library:      /home/opam/.opam/4.12/lib/ocaml
-     Binaries:              /home/opam/.opam/4.12/bin
-     Manual pages:          /home/opam/.opam/4.12/man
-     Multi-threading type:  posix
- The directory of site-specific packages will be
-     site-lib:              /home/opam/.opam/4.12/lib
- The configuration file is written to:
-     findlib config file:   /home/opam/.opam/4.12/lib/findlib.conf
- Software will be installed:
-     Libraries:             in <site-lib>/findlib
-     Binaries:              /home/opam/.opam/4.12/bin
-     Manual pages:          /home/opam/.opam/4.12/man
-     topfind script:        /home/opam/.opam/4.12/lib/ocaml
- Topfind ppxopt support:    yes
- Toolbox:                   no
- Link custom runtime:       no
- Need bytes compatibility:  no
- 
- Configuration has been written to Makefile.config
- 
- You can now do 'make all', and optionally 'make opt', to build ocamlfind.
Processing  6/9: [ocamlfind: make all]
+ /home/opam/.opam/opam-init/hooks/sandbox.sh "build" "make" "all" (CWD=/home/opam/.opam/4.12/.opam-switch/build/ocamlfind.1.9.6)
- for p in findlib; do ( cd src/$p; make all ) || exit; done
- make[1]: Entering directory '/home/opam/.opam/4.12/.opam-switch/build/ocamlfind.1.9.6/src/findlib'
- ocamllex fl_meta.mll
- 22 states, 392 transitions, table size 1700 bytes
- USE_CYGPATH="0"; \
- export USE_CYGPATH; \
- cat findlib_config.mlp | \
-          ../../tools/patch '@CONFIGFILE@' '/home/opam/.opam/4.12/lib/findlib.conf' | \
-          ../../tools/patch '@STDLIB@' '/home/opam/.opam/4.12/lib/ocaml' | \
- 	sed -e 's;@AUTOLINK@;true;g' \
- 	    -e 's;@SYSTEM@;linux;g' \
- 	     >findlib_config.ml
- if [ "true" = "true" ]; then                 \
- 	cp topfind.ml.in topfind.ml;                             \
- else                                                             \
- 	sed -e '/PPXOPT_BEGIN/,/PPXOPT_END/ d' topfind.ml.in     \
- 		> topfind.ml ;                                   \
- fi
- ocamldep *.ml *.mli >depend
- ocamlc -I +compiler-libs -opaque   -I +unix -I +dynlink -g -c findlib_config.ml
- ocamlc -I +compiler-libs -opaque   -I +unix -I +dynlink -g -c fl_split.ml
- ocamlc -I +compiler-libs -opaque   -I +unix -I +dynlink -g -c fl_metatoken.ml
- ocamlc -I +compiler-libs -opaque   -I +unix -I +dynlink -g -c fl_meta.ml
- ocamlc -I +compiler-libs -opaque   -I +unix -I +dynlink -c fl_metascanner.mli
- ocamlc -I +compiler-libs -opaque   -I +unix -I +dynlink -g -c fl_metascanner.ml
- ocamlc -I +compiler-libs -opaque   -I +unix -I +dynlink -c fl_topo.mli
- ocamlc -I +compiler-libs -opaque   -I +unix -I +dynlink -g -c fl_topo.ml
- ocamlc -I +compiler-libs -opaque   -I +unix -I +dynlink -c fl_package_base.mli
- ocamlc -I +compiler-libs -opaque   -I +unix -I +dynlink -g -c fl_package_base.ml
- ocamlc -I +compiler-libs -opaque   -I +unix -I +dynlink -c findlib.mli
- ocamlc -I +compiler-libs -opaque   -I +unix -I +dynlink -g -c findlib.ml
- ocamlc -I +compiler-libs -opaque   -I +unix -I +dynlink -g -c fl_args.ml
- ocamlc -I +compiler-libs -opaque   -I +unix -I +dynlink -g -c fl_lint.ml
- ocamlc -I +compiler-libs -a -o findlib.cma findlib_config.cmo fl_split.cmo fl_metatoken.cmo fl_meta.cmo fl_metascanner.cmo fl_topo.cmo fl_package_base.cmo findlib.cmo fl_args.cmo fl_lint.cmo
- ocamlc -I +compiler-libs -opaque   -I +unix -I +dynlink -g -c ocaml_args.ml
- ocamlc -I +compiler-libs -opaque   -I +unix -I +dynlink -g -c frontend.ml
- ocamlc -I +compiler-libs  -o ocamlfind -g findlib.cma unix.cma \
-            -I +unix -I +dynlink ocaml_args.cmo frontend.cmo
- ocamlc -I +compiler-libs -opaque   -I +unix -I +dynlink -c topfind.mli
- ocamlc -I +compiler-libs -opaque   -I +unix -I +dynlink -g -c topfind.ml
- ocamlc -I +compiler-libs -a -o findlib_top.cma topfind.cmo
- USE_CYGPATH="0"; \
- export USE_CYGPATH; \
- cat topfind_rd1.p | \
-          ../../tools/patch '@SITELIB@' '/home/opam/.opam/4.12/lib' \
-     	    >topfind
- ocamlc -I +compiler-libs -opaque   -I +unix -I +dynlink -c fl_dynload.mli
- ocamlc -I +compiler-libs -opaque   -I +unix -I +dynlink -g -c fl_dynload.ml
- ocamlc -I +compiler-libs -a -o findlib_dynload.cma fl_dynload.cmo
- make[1]: Leaving directory '/home/opam/.opam/4.12/.opam-switch/build/ocamlfind.1.9.6/src/findlib'
- make all-config
- make[1]: Entering directory '/home/opam/.opam/4.12/.opam-switch/build/ocamlfind.1.9.6'
- USE_CYGPATH="0"; \
- export USE_CYGPATH; \
- cat findlib.conf.in | \
-      tools/patch '@SITELIB@' '/home/opam/.opam/4.12/lib' | \
- 		 tools/patch '@FINDLIB_PATH@' '/home/opam/.opam/4.12/lib' -p >findlib.conf
- if ./tools/cmd_from_same_dir ocamlc; then \
- 	echo 'ocamlc="ocamlc.opt"' >>findlib.conf; \
- fi
- if ./tools/cmd_from_same_dir ocamlopt; then \
- 	echo 'ocamlopt="ocamlopt.opt"' >>findlib.conf; \
- fi
- if ./tools/cmd_from_same_dir ocamldep; then \
- 	echo 'ocamldep="ocamldep.opt"' >>findlib.conf; \
- fi
- if ./tools/cmd_from_same_dir ocamldoc; then \
- 	echo 'ocamldoc="ocamldoc.opt"' >>findlib.conf; \
- fi
- make[1]: Leaving directory '/home/opam/.opam/4.12/.opam-switch/build/ocamlfind.1.9.6'
Processing  6/9: [ocamlfind: make opt]
+ /home/opam/.opam/opam-init/hooks/sandbox.sh "build" "make" "opt" (CWD=/home/opam/.opam/4.12/.opam-switch/build/ocamlfind.1.9.6)
- for p in findlib; do ( cd src/$p; make opt ) || exit; done
- make[1]: Entering directory '/home/opam/.opam/4.12/.opam-switch/build/ocamlfind.1.9.6/src/findlib'
- ocamlopt -I +compiler-libs -g -opaque  -I +unix -I +dynlink -c findlib_config.ml
- ocamlopt -I +compiler-libs -g -opaque  -I +unix -I +dynlink -c fl_split.ml
- ocamlopt -I +compiler-libs -g -opaque  -I +unix -I +dynlink -c fl_metatoken.ml
- ocamlopt -I +compiler-libs -g -opaque  -I +unix -I +dynlink -c fl_meta.ml
- ocamlopt -I +compiler-libs -g -opaque  -I +unix -I +dynlink -c fl_metascanner.ml
- ocamlopt -I +compiler-libs -g -opaque  -I +unix -I +dynlink -c fl_topo.ml
- ocamlopt -I +compiler-libs -g -opaque  -I +unix -I +dynlink -c fl_package_base.ml
- ocamlopt -I +compiler-libs -g -opaque  -I +unix -I +dynlink -c findlib.ml
- ocamlopt -I +compiler-libs -g -opaque  -I +unix -I +dynlink -c fl_args.ml
- ocamlopt -I +compiler-libs -g -opaque  -I +unix -I +dynlink -c fl_lint.ml
- ocamlopt -I +compiler-libs -g -a -o findlib.cmxa findlib_config.cmx fl_split.cmx fl_metatoken.cmx fl_meta.cmx fl_metascanner.cmx fl_topo.cmx fl_package_base.cmx findlib.cmx fl_args.cmx fl_lint.cmx
- if [ 1 -gt 0 ]; then \
-     ocamlopt -I +compiler-libs -g -shared -o findlib.cmxs findlib_config.cmx fl_split.cmx fl_metatoken.cmx fl_meta.cmx fl_metascanner.cmx fl_topo.cmx fl_package_base.cmx findlib.cmx fl_args.cmx fl_lint.cmx; \
- fi
- ocamlopt -I +compiler-libs -g -opaque  -I +unix -I +dynlink -c ocaml_args.ml
- ocamlopt -I +compiler-libs -g -opaque  -I +unix -I +dynlink -c frontend.ml
- ocamlopt -I +compiler-libs -g -o ocamlfind_opt findlib.cmxa unix.cmxa \
- 	   -I +unix -I +dynlink ocaml_args.cmx frontend.cmx
- ocamlopt -I +compiler-libs -g -opaque  -I +unix -I +dynlink -c topfind.ml
- File "_none_", line 1:
- Warning 58 [no-cmx-file]: no cmx file was found in path for module Topdirs, and its interface was not compiled with -opaque
- File "_none_", line 1:
- Warning 58 [no-cmx-file]: no cmx file was found in path for module Toploop, and its interface was not compiled with -opaque
- ocamlopt -I +compiler-libs -g -a -o findlib_top.cmxa topfind.cmx
- if [ 1 -gt 0 ]; then \
-     ocamlopt -I +compiler-libs -g -shared -o findlib_top.cmxs topfind.cmx; \
- fi
- ocamlopt -I +compiler-libs -g -opaque  -I +unix -I +dynlink -c fl_dynload.ml
- ocamlopt -I +compiler-libs -g -a -o findlib_dynload.cmxa fl_dynload.cmx
- if [ 1 -gt 0 ]; then \
-     ocamlopt -I +compiler-libs -g -shared -o findlib_dynload.cmxs fl_dynload.cmx; \
- fi
- make[1]: Leaving directory '/home/opam/.opam/4.12/.opam-switch/build/ocamlfind.1.9.6/src/findlib'
-> compiled  ocamlfind.1.9.6
Processing  7/9: [ocamlfind: make install]
+ /home/opam/.opam/opam-init/hooks/sandbox.sh "install" "make" "install" (CWD=/home/opam/.opam/4.12/.opam-switch/build/ocamlfind.1.9.6)
- if [ "1" -eq 1 ]; then \
-     for x in camlp4 dbm graphics labltk num ocamlbuild; do \
-       if [ -f "/home/opam/.opam/4.12/lib/$x/META" ]; then \
-         if ! grep -Fq '[distributed with Ocaml]' "//home/opam/.opam/4.12/lib/$x/META"; then \
-           rm -f site-lib-src/$x/META; \
-         fi; \
-       fi; \
-     done; \
-     test -f "site-lib-src/num/META" || rm -f "site-lib-src/num-top/META"; \
-   fi
- echo 'SITELIB_META =' > Makefile.packages.in
- for x in `ls site-lib-src`; do test ! -f "site-lib-src/$x/META" || echo $x >> Makefile.packages.in; done
- tr '\n' ' ' < Makefile.packages.in > Makefile.packages
- rm Makefile.packages.in
- install -d "/home/opam/.opam/4.12/bin"
- install -d "/home/opam/.opam/4.12/man"
- make install-config
- make[1]: Entering directory '/home/opam/.opam/4.12/.opam-switch/build/ocamlfind.1.9.6'
- install -d "`dirname \"/home/opam/.opam/4.12/lib/findlib.conf\"`"
- test -f "/home/opam/.opam/4.12/lib/findlib.conf" || install -c findlib.conf "/home/opam/.opam/4.12/lib/findlib.conf"
- make[1]: Leaving directory '/home/opam/.opam/4.12/.opam-switch/build/ocamlfind.1.9.6'
- for p in findlib; do ( cd src/$p; make install ); done
- make[1]: Entering directory '/home/opam/.opam/4.12/.opam-switch/build/ocamlfind.1.9.6/src/findlib'
- install -d "/home/opam/.opam/4.12/lib/findlib"
- install -d "/home/opam/.opam/4.12/bin"
- test 1 -eq 0 || install -d "/home/opam/.opam/4.12/lib/ocaml"
- test 1 -eq 0 || install -c topfind "/home/opam/.opam/4.12/lib/ocaml/"
- files=` ../../tools/collect_files ../../Makefile.config \
- findlib.cmi findlib.mli findlib.cma findlib.cmxa findlib.a findlib.cmxs \
- findlib_config.cmi findlib_config.ml topfind.cmi topfind.mli \
- fl_args.cmi fl_lint.cmi fl_meta.cmi fl_split.cmi fl_topo.cmi ocaml_args.cmi \
- fl_package_base.mli fl_package_base.cmi fl_metascanner.mli fl_metascanner.cmi \
- fl_metatoken.cmi findlib_top.cma findlib_top.cmxa findlib_top.a findlib_top.cmxs \
- findlib_dynload.cma findlib_dynload.cmxa findlib_dynload.a findlib_dynload.cmxs fl_dynload.mli fl_dynload.cmi \
- META` && \
- install -c $files "/home/opam/.opam/4.12/lib/findlib/"
- f="ocamlfind"; { test -f ocamlfind_opt && f="ocamlfind_opt"; }; \
- install -c $f "/home/opam/.opam/4.12/bin/ocamlfind"
- # the following "if" block is only needed for 4.00beta2
- if [ 1 -eq 0 -a -f "/home/opam/.opam/4.12/lib/ocaml/compiler-libs/topdirs.cmi" ]; then \
-     cd "/home/opam/.opam/4.12/lib/ocaml/compiler-libs/"; \
-     install -c topdirs.cmi toploop.cmi "/home/opam/.opam/4.12/lib/findlib/"; \
- fi
- make[1]: Leaving directory '/home/opam/.opam/4.12/.opam-switch/build/ocamlfind.1.9.6/src/findlib'
- make install-meta
- make[1]: Entering directory '/home/opam/.opam/4.12/.opam-switch/build/ocamlfind.1.9.6'
- for x in bigarray bytes compiler-libs dynlink ocamldoc stdlib str threads unix ; do install -d "/home/opam/.opam/4.12/lib/$x"; install -c site-lib-src/$x/META "/home/opam/.opam/4.12/lib/$x/META.tmp" && mv "/home/opam/.opam/4.12/lib/$x/META.tmp" "/home/opam/.opam/4.12/lib/$x/META"; done
- install -d "/home/opam/.opam/4.12/lib/findlib"; install -c Makefile.packages "/home/opam/.opam/4.12/lib/findlib/Makefile.packages"
- make[1]: Leaving directory '/home/opam/.opam/4.12/.opam-switch/build/ocamlfind.1.9.6'
- test ! -f 'site-lib-src/num-top/META' || { cd src/findlib; make install-num-top; }
- test ! -f 'site-lib-src/camlp4/META' ||	install -c tools/safe_camlp4 "/home/opam/.opam/4.12/bin"
- make install-doc
- make[1]: Entering directory '/home/opam/.opam/4.12/.opam-switch/build/ocamlfind.1.9.6'
- install -d "/home/opam/.opam/4.12/man/man1" "/home/opam/.opam/4.12/man/man3" "/home/opam/.opam/4.12/man/man5"
- install -c doc/ref-man/ocamlfind.1 "/home/opam/.opam/4.12/man/man1"
- install -c doc/ref-man/META.5 doc/ref-man/site-lib.5 doc/ref-man/findlib.conf.5 "/home/opam/.opam/4.12/man/man5"
- make[1]: Leaving directory '/home/opam/.opam/4.12/.opam-switch/build/ocamlfind.1.9.6'
-> installed ocamlfind.1.9.6
Processing  8/9: [aacplus: ./configure]
+ /home/opam/.opam/opam-init/hooks/sandbox.sh "build" "./configure" "--prefix" "/home/opam/.opam/4.12" (CWD=/home/opam/.opam/4.12/.opam-switch/build/aacplus.0.2.2)
- configuring ocaml-aacplus 0.2.2
- checking for gcc... gcc
- checking whether the C compiler works... yes
- checking for C compiler default output file name... a.out
- checking for suffix of executables... 
- checking whether we are cross compiling... no
- checking for suffix of object files... o
- checking whether we are using the GNU C compiler... yes
- checking whether gcc accepts -g... yes
- checking for gcc option to accept ISO C89... none needed
- checking build system type... x86_64-unknown-linux-gnu
- checking host system type... x86_64-unknown-linux-gnu
- checking for a BSD-compatible install... 
- /usr/bin/install -c
- checking that calling user is not root... ok
- checking for gcc... (cached) gcc
- checking whether we are using the GNU C compiler... (cached) yes
- checking whether gcc accepts -g... (cached) yes
- checking for gcc option to accept ISO C89... (cached) none needed
- checking for ar... ar
- checking for ocamlc... ocamlc
- OCaml version is 4.12.1
- checking if ocaml compiler supports first-class modules... yes
- OCaml library path is /home/opam/.opam/4.12/lib/ocaml
- checking for ocamlopt... ocamlopt
- checking for ocamlc.opt... ocamlc.opt
- checking for ocamlopt.opt... ocamlopt.opt
- checking for ocaml... ocaml
- checking for ocamldep... ocamldep
- checking for ocamldep.opt... ocamldep.opt
- checking for ocamlmktop... ocamlmktop
- checking for ocamlmklib... ocamlmklib
- checking for ocamldoc... ocamldoc
- checking for ocamldoc.opt... ocamldoc.opt
- checking for ocamlbuild... no
- checking for camlidl... no
- checking for ocamllex... ocamllex
- checking for ocamllex.opt... ocamllex.opt
- checking for ocamlyacc... ocamlyacc
- checking for camlp4... no
- checking for camlp4boot... no
- checking for camlp4o... no
- checking for camlp4of... no
- checking for camlp4oof... no
- checking for camlp4orf... no
- checking for camlp4prof... no
- checking for camlp4r... no
- checking for camlp4rf... no
- checking for ocamlfind... ocamlfind
- checking for ocaml standard library path... /home/opam/.opam/4.12/lib/ocaml
- checking for caml/threads.h... no
- checking for gcc option to produce PIC... -fPIC
- checking whether to build shared modules... yes
- checking for pkg-config... /usr/bin/pkg-config
- checking pkg-config is at least version 0.9.0... yes
- checking whether pkg-config knows about aacplus >= 2.0.1... configure: error: aacplus.pc not found.. Do you need to set PKG_CONFIG_PATH?
[ERROR] The compilation of aacplus.0.2.2 failed at "./configure --prefix /home/opam/.opam/4.12".

#=== ERROR while compiling aacplus.0.2.2 ======================================#
# context              2.4.0~alpha1~dev | linux/x86_64 | ocaml-base-compiler.4.12.1 | file:///home/opam/opam-repository
# path                 ~/.opam/4.12/.opam-switch/build/aacplus.0.2.2
# command              ~/.opam/opam-init/hooks/sandbox.sh build ./configure --prefix /home/opam/.opam/4.12
# exit-code            1
# env-file             ~/.opam/log/aacplus-8-f169b1.env
# output-file          ~/.opam/log/aacplus-8-f169b1.out
### output ###
# configuring ocaml-aacplus 0.2.2
# checking for gcc... gcc
# checking whether the C compiler works... yes
# checking for C compiler default output file name... a.out
# checking for suffix of executables... 
# checking whether we are cross compiling... no
# checking for suffix of object files... o
# checking whether we are using the GNU C compiler... yes
# checking whether gcc accepts -g... yes
# checking for gcc option to accept ISO C89... none needed
# checking build system type... x86_64-unknown-linux-gnu
# checking host system type... x86_64-unknown-linux-gnu
# checking for a BSD-compatible install... /usr/bin/install -c
# checking that calling user is not root... ok
# checking for gcc... (cached) gcc
# checking whether we are using the GNU C compiler... (cached) yes
# checking whether gcc accepts -g... (cached) yes
# checking for gcc option to accept ISO C89... (cached) none needed
# checking for ar... ar
# checking for ocamlc... ocamlc
# OCaml version is 4.12.1
# checking if ocaml compiler supports first-class modules... yes
# OCaml library path is /home/opam/.opam/4.12/lib/ocaml
# checking for ocamlopt... ocamlopt
# checking for ocamlc.opt... ocamlc.opt
# checking for ocamlopt.opt... ocamlopt.opt
# checking for ocaml... ocaml
# checking for ocamldep... ocamldep
# checking for ocamldep.opt... ocamldep.opt
# checking for ocamlmktop... ocamlmktop
# checking for ocamlmklib... ocamlmklib
# checking for ocamldoc... ocamldoc
# checking for ocamldoc.opt... ocamldoc.opt
# checking for ocamlbuild... no
# checking for camlidl... no
# checking for ocamllex... ocamllex
# checking for ocamllex.opt... ocamllex.opt
# checking for ocamlyacc... ocamlyacc
# checking for camlp4... no
# checking for camlp4boot... no
# checking for camlp4o... no
# checking for camlp4of... no
# checking for camlp4oof... no
# checking for camlp4orf... no
# checking for camlp4prof... no
# checking for camlp4r... no
# checking for camlp4rf... no
# checking for ocamlfind... ocamlfind
# checking for ocaml standard library path... /home/opam/.opam/4.12/lib/ocaml
# checking for caml/threads.h... no
# checking for gcc option to produce PIC... -fPIC
# checking whether to build shared modules... yes
# checking for pkg-config... /usr/bin/pkg-config
# checking pkg-config is at least version 0.9.0... yes
# checking whether pkg-config knows about aacplus >= 2.0.1... configure: error: aacplus.pc not found.. Do you need to set PKG_CONFIG_PATH?



<><> Error report <><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><>
+- The following actions failed
| - build aacplus 0.2.2
+- 
+- The following changes have been performed
| - install conf-pkg-config 3
| - install ocamlfind       1.9.6
+- 
# To update the current shell environment, run: eval $(opam env)

The former state can be restored with:
    /usr/bin/opam switch import "/home/opam/.opam/4.12/.opam-switch/backup/state-20241122011540.export"
'opam install -vy aacplus.0.2.2' failed.
This package failed and has been disabled for CI using the 'x-ci-accept-failures' field.
"/usr/bin/env" "bash" "-c" "
opam remove -y "aacplus.0.2.2"
opam install -vy "aacplus.0.2.2"
res=$?
if [ $res = 31 ]; then
    if opam show -f x-ci-accept-failures: "aacplus.0.2.2" | grep -q '"debian-unstable"'; then
        echo "This package failed and has been disabled for CI using the 'x-ci-accept-failures' field."
        exit 69
    fi
fi


exit $res
" failed with exit status 69
Failed: Build failed